Inchware installers
Last updated 26 June 2009
Please follow the
instructions
below for the version you require.
Please do not install any software from this
page
without first contacting Inchware support.
Failure to do so could render your Inchware system unusable.
Email: support@inchware.com
Tel: 01628 789 951
Pocket
Synergy for Synergy 1.8/1.9 - Latest version 3.0.3 (updated 26 May
2009)
Pocket
Premiere - Latest version 2.5.2 (updated 23 June 2009)
Pocket
Ganymede - Latest version 2.5.0 (23 April 2008)
(formerly known as
Pocket Torex)
for iSoft Synergy 1.8/1.9 users -
1.6/1.7 users please contact
Inchware
Existing
Pocket Synergy users - Synergy 1.9 uses a new database,
Firebird, which requires updated Inchware software if you wish to
continue using Pocket Synergy.
- You can install this new version if you're using either Synergy
1.8 or 1.9
- If you upgrade Synergy from 1.8 to 1.9 after installing
this version, Pocket Synergy must be reconfigured - please see here
Installation
instructions
(Synergy 1.8/1.9)
- Go to your Clinical server
- Download and run the Pocket Synergy
full installer (PTServer-3.0.3.exe,12.5MB)
- Follow on-screen instructions which will guide you through
the installation
- Click here for
instructions for configuration of hyperlinks
/ Apollo scanned documents
processing
- Click here for instructions
for configuration of Docman scanned
documents processing
- See here for latest
improvements / changes
- Due to databases, you will not be able to synchronise until the
overnight database build has been run
First-time Pocket
Synergy users
- After the installation on the clinical server, configure required
desktop workstations:
- Windows Mobile users - install Microsoft ActiveSync before you
connect your handheld computer
- Run desktop installer S:\inchware\iClient\shared\install\Desktop\setup.exe
- Follow on-screen instructions which will guide you through
the installation
Upgrading from
earlier Pocket Synergy versions
- See here for latest
improvements / changes
- The patient demographics table has changed - you must
allow an overnight Pocket Synergy export to run before running
Sinch
- If you upgrade Synergy from 1.8 to 1.9 after
installing this version, Pocket Synergy must be reconfigured - please see here
- This version supports only AES-256 and 3DES-168
encryption
- AES-256 encryption requires Windows 2003 Server clinical
server and Windows XP desktops/laptops. Handhelds, if used, must be
Windows Mobile 5/6 devices
- 3DES-168 encryption will operate on any Windows 2000/XP
desktop. Pre-2004 handhelds, if used, may require an update - see here
- If you use our Docman integration, this must be
reconfigured before the next overnight run, otherwise the process will
fail
- Click here for instructions
for configuration of Docman scanned documents processing
- After the installation on the clinical server, Sinch
workstations should prompt you to update when you click Synchronise
Now button
- If you are not prompted, then you're upgrading from an early
version of Pocket Synergy
- In this case, please run the desktop installer
- S:\inchware\iClient\shared\install\Desktop\setup.exe
- Pocket Appointments is no longer supported
- This has been removed to preclude possible security concerns
- WARNING:
Pocket Synergy version 1.2 users (last installed before February
2005):
- This version requires more disk space than version 1.2;
please ensure at least 10Gb free on S: drive
- You may require additional storage memory when synchronising
to handheld devices when upgrading from version 1.2
- Please note: this version does not
support HP Jornada 690 or 720
devices
User guide
The guide is in MS
Word 2000
format,
and is also included in the full installer above.
Pocket Synergy
recent changes
3.0.3 - 26/05/09
- Quick-access buttons from Current Problems area
- (P1653) X-rays, Labs and Tests are now viewable as per Synergy
- (P1605) Patient Allergies and Sensitivities now viewable
- (P1623) Support for FrontDesk 3.0
2.5.5 - 06/11/08
- (P1493) Added screen layout for Ultra-Mobile PC
(1024x600)
- (P1489) Resolved Firebird export speed problems
- (P1479) Now use practice database to determine which Read
codes can be imported back from Pocket Synergy
- (P1472) Resolved Firebird exports numerics with
a large number of decimal places, e.g. 28.0000000000000
2.5.4 - 10/10/08
- (P1471) Resolved auto-update problem - this
version, and all future versions will auto-update unless stated
otherwise
- (P1470) Resolved Synergy 1.9 / Firebird export
reliability problems
- (P1464) Resolved Frontdesk appointments
reliability problem
- (P1466) Resolved Edit Users problem
2.5.2 - 15/08/08
- Support for Synergy 1.9 / Firebird
- Support for AES-256 encryption (requires Windows 2003 Server clinical
server, XP desktops/laptops and Windows Mobile 5/6 devices)
- Support for 3DES-168 encryption (pre-2004 Pocket PC devices may require an
update - see here)
- Now possible to enter several search terms for
patient / Read code selection e.g.
- smi fre to select Fred Smith (and similar names)
- seen home to select Seen In Own Home (and similar
items)
- aspi tab to select aspirin tablets (and similar
items)
2.4.0
- Support for multiple document
stores, including ApolloScan, Hyperlinks and Docman
- Improved desktop Business Continuity (resilience)
- QoF expiry date extended
Reconfiguring Pocket Synergy for Synergy 1.9
- If you upgrade to Synergy 1.9 after installing this version,
please reconfigure the software as follows:
- Start the Pocket Synergy Server Configuration
utility (shortcut on Clinical server desktop background)
- Click OK button
- All being well the configuration is now complete - the
utility will let you know if not.
for iSoft Premiere
users, Premiere 2.11 or later.
Installation
instructions
Installing Pocket
Premiere
- All users: install the Pocket
Premiere full installer (PPServer-2.5.2.exe,
11.1MB)
- Click here for instructions for
configuration of hyperlinks / Apollo scanned documents processing
- Click here for instructions for
configuration of Docman scanned
documents processing
- WARNING:
Version 1.1 users (last installed before September 2005):
- this version requires more disk space than version 1.1;
please ensure at least 5Gb free on chosen install drive
- you may require additional storage memory when synchronising
to handheld devices when upgrading from version 1.1
- Pocket Premiere is compatible
with Premiere 2.11 or later
ONLY
- Please note: this version does not currently
support HP Jornada devices (690,
720)
User guide
The guide is in MS
Word 2000
format,
and is also included in the full installer above..
Configuring hyperlinks / Apollo scanned
documents processing
- Start the configuration utility
- Pocket Synergy users:
double-click "Pocket Synergy Server Configuration" icon on your clinical server desktop
- Pocket Premiere users:
double-click "Pocket Premiere Server Configuration" icon on your clinical server desktop
- Click the Edit
Hyperlink Dirs button
- Click the Add
button
- First entry: click Lookup hyperlinks from
server
- Subsequent entries:
enter a full network path, including the Storage / DocStorage
folder
- e.g. \\CLINICAL\ApolloDocs\DocStorage
- NOT C:\ApolloDocs\DocStorage
- Press OK,
repeat as necessary
Configuring Docman scanned documents processing
- Select
'export' machine
- Docman 6 users
- If Docman is installed on your Clinical server, use this
- Otherwise, select any workstation with Docman installed which
is not switched off at night
- Docman 7 users
- If Docman is installed on your Clinical server, use this
- Otherwise, use your Docman server
- Docman 7 Notes:
- You must activate the 'Pocket
Docman' licence in the Docman System Administration 'Licence
Manager' before proceeding
- Once you have done this, log in to Docman from your
chosen machine before continuing further to complete the licence
activation
- Locate the
configuration utility
- Pocket Synergy users: open the folder
- S:\inchware\iClient\shared\tool\sconf
- Pocket Premiere users: open the folder
- \\CLINICAL\inchware\inchware\iClient\shared\tool\sconf
- If your clinical server is NOT called CLINICAL,
replace the word CLINICAL
above with your server name e.g. Z00123
- Double-click configure[.exe]
- Configure Docman
version
- Docman 6 users: clear the 'Docman 7'
box (circled above, top)
- Docman 7 users: tick the 'Docman 7'
box (circled above, top)
- Click the List cabinets
button
- Enter the number
of the 'Patients' cabinet into the "Cabinet ID' box (circled above,
centre)
- Enter the
Windows password in the Password box (circled above, bottom-right)
- Click OK
for iSoft Ganymede users - engineer install only
Self-extracting
installer for Pocket Ganymede:
![[Screenshot]](dconf.gif)